Sleeved barrels - An economical method of bringing new life to a damaged pair of barrels, regardless of their original method of jointing. The ribs are removed. The old barrels are cut off 3" - 4" from the breech end and discarded. The bores of the remaining breech-end are reamed out oversize. New tubes are fitted down into the original breech section and filed down to fit flush. The original ribs are then replaced. Sleeving is considerably less expensive than building a completely new set of barrels. As much of the time required to build a set of new barrels is concentrated in the fitting of the breech end to the receiver; this work is salvaged through sleeving. Sleeving can be recognized by a pair of circumferential lines around the barrels a few inches from the breech, and by a ring around the chamber openings at the breech. The more invisible, the finer the job. A sleeved gun should always be identified as such amongst the proof marks, and if done in England must be properly reproofed.



The Hallowell & Co. Illustrated Firearms Dictionary is for informational purposes only. We do not necessarily offer the items described above for sale. Please click on any of the links below to see what we actually do have available for purchase.

American Shotguns      English Shotguns       European Shotguns      Double Rifles      Magazine Rifles        Single Shot Rifles      Combination Guns

Winchester      Colt      Smith & Wesson        Other Handguns          Antique Guns       New Arrivals             Custom Knives          Other Neat Stuff


Who We Are       How to Order      We want to buy your Gun(s)       Recommended Links     Historical Gallery         

Firearms Definitions, Abbreviations & Opinions     Store Photos     Magazine Articles          Home  

Hallowell & Co., Inc. PO Box 1445. Livingston, Montana  59047   USA   Tel: 406 222-4770    Fax: 406 222-4792     Email:

Hours: Tuesday - Saturday, 10 - 6.   (Mountain Time)   Our inventory is constantly changing. Please bookmark this site and return often.