Custom hand forged iron fireplace tools firescreens pokers andirons
Morris L Hallowell IV - Custom Architectural Ironwork
Firescreens
Freestanding Firescreen, arched top, tab feet and side handles for use on raised exterior hearth.
Freestanding firescreen, rectangular, with legs and top handles, andirons and firetool set, all scaled to moderately-sized fireplace. And, closet door pulls in background.
Freestanding Firescreen. Made to measure to fit your fireplace. Single panel or double panel (for very large fireplace). Top handles or side handles (depending on width of screen). Broad-hammered or peen-hammered surface.
Riveted overlapping corner joint and riveted handle, forged to length to match rivet spacing.
Rear view. Upper-left corner of hammered back frame, riveted to the front frame, sandwiching 6-to-the-inch steel wire mesh.
Riveted leg with upset foot, forged from one-inch square steel bar.
Standing firescreen for a six-foot-wide fireplace, built in two segments for ease of handling.
Fireplace surround and curved firescreen. Handles mounted to inside-rear of screen for better balance when lifting.
To fulfill your concept, made especially for you, takes time. If you are considering some custom hardware for a project you are undertaking, please consider ordering it in parallel with your project rather than waiting until you are ready to install. If you can order it enough in advance, it will be far more likely that it will be ready for you when you are ready for it.
Furniture Door and Cabinet Hardware Other Hardware Door Knockers Fireplace Gear Candlesticks Handrails Lighting
Photos of the Studio Basic Blacksmithing Processes NRBA - Northern Rockies Blacksmith Association Home
Morris L. Hallowell IV - Architectural Ironwork
PO Box 1445, Livingston, MT 59047 Tel: 406 222-4770 Fax: 406 222-4792 Email: morris@hallowellco.com
Please see also my other site: Hallowell & Co. Fine Sporting Guns